The oxidation of Cu(I) with H2O2 in natural waters

Virender K. Sharma, Frank J Millero

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

The oxidation of Cu(I) with H2O2 in seawater and in NaCl solutions has been measured as a function of pH (6 to 9), temperature (5 to 45°C), ionic strength (0.5 to 6 m) and composition. The seawater rate constants, K (M-1 s-1), for the oxidation d[Cu(I)]/dt = -k[Cu(I)][H2O2] have been fitted to the equation log k = 11.55 - 2250/T - 3.71I 1 2 + 2.06I with a σ = 0.04. The energy of activation was 43.1 ± 1.0 kJ mol-1. At a constant ionic strength (I = 1, 3, and 6 m) in NaCl-NaClO4 mixtures, the Cl- dependence has been attributed to the oxidation of various forms of Cu(I) in the solution. At a fixed Cl- concentration, the addition of Mg2+ causes the rate to decrease, and the addition of HCO- 3 causes the rate to increase. The increase due to HCO- 3 may be due to the formation of CuHCO0 3 which has a faster rate of oxidation than CuCl0. The decrease caused by Mg2+ may be due to the slow exchange of MgEDTA or MgCO3 with Cu2+, which may cause the overall oxidation rates of Cu(I) to be slower due to back reactions of Cu(II) with H2O2. Empirical equations for the rate of oxidation of Cu(I) with H2O2 in natural waters are given. The H2O2 results are compared with the kinetics of Cu(I) oxidation with O2 in natural waters. At the levels of O2 (200 μM) and H2O2 (0.1 μM) in surface sea waters, the oxygen oxidation is 130 times faster than peroxide oxidation. In rainwaters, however, the concentration of hydrogen peroxide (100 μM) is great enough so that H2O2 is the dominant oxidant for Cu(I).

Original languageEnglish (US)
Pages (from-to)2269-2276
Number of pages8
JournalGeochimica et Cosmochimica Acta
Volume53
Issue number9
DOIs
StatePublished - 1989

Fingerprint

oxidation
Oxidation
Water
water
Ionic strength
seawater
Seawater
Peroxides
rainwater
Oxidants
oxidant
hydrogen peroxide
Hydrogen Peroxide
rate
Rate constants
Chemical activation
Oxygen
surface water
kinetics
oxygen

ASJC Scopus subject areas

  • Geochemistry and Petrology

Cite this

The oxidation of Cu(I) with H2O2 in natural waters. / Sharma, Virender K.; Millero, Frank J.

In: Geochimica et Cosmochimica Acta, Vol. 53, No. 9, 1989, p. 2269-2276.

Research output: Contribution to journalArticle

Sharma, Virender K. ; Millero, Frank J. / The oxidation of Cu(I) with H2O2 in natural waters. In: Geochimica et Cosmochimica Acta. 1989 ; Vol. 53, No. 9. pp. 2269-2276.
@article{4a86f10b91d64121867dff10feb27fc5,
title = "The oxidation of Cu(I) with H2O2 in natural waters",
abstract = "The oxidation of Cu(I) with H2O2 in seawater and in NaCl solutions has been measured as a function of pH (6 to 9), temperature (5 to 45°C), ionic strength (0.5 to 6 m) and composition. The seawater rate constants, K (M-1 s-1), for the oxidation d[Cu(I)]/dt = -k[Cu(I)][H2O2] have been fitted to the equation log k = 11.55 - 2250/T - 3.71I 1 2 + 2.06I with a σ = 0.04. The energy of activation was 43.1 ± 1.0 kJ mol-1. At a constant ionic strength (I = 1, 3, and 6 m) in NaCl-NaClO4 mixtures, the Cl- dependence has been attributed to the oxidation of various forms of Cu(I) in the solution. At a fixed Cl- concentration, the addition of Mg2+ causes the rate to decrease, and the addition of HCO- 3 causes the rate to increase. The increase due to HCO- 3 may be due to the formation of CuHCO0 3 which has a faster rate of oxidation than CuCl0. The decrease caused by Mg2+ may be due to the slow exchange of MgEDTA or MgCO3 with Cu2+, which may cause the overall oxidation rates of Cu(I) to be slower due to back reactions of Cu(II) with H2O2. Empirical equations for the rate of oxidation of Cu(I) with H2O2 in natural waters are given. The H2O2 results are compared with the kinetics of Cu(I) oxidation with O2 in natural waters. At the levels of O2 (200 μM) and H2O2 (0.1 μM) in surface sea waters, the oxygen oxidation is 130 times faster than peroxide oxidation. In rainwaters, however, the concentration of hydrogen peroxide (100 μM) is great enough so that H2O2 is the dominant oxidant for Cu(I).",
author = "Sharma, {Virender K.} and Millero, {Frank J}",
year = "1989",
doi = "10.1016/0016-7037(89)90349-9",
language = "English (US)",
volume = "53",
pages = "2269--2276",
journal = "Geochmica et Cosmochimica Acta",
issn = "0016-7037",
publisher = "Elsevier Limited",
number = "9",

}

TY - JOUR

T1 - The oxidation of Cu(I) with H2O2 in natural waters

AU - Sharma, Virender K.

AU - Millero, Frank J

PY - 1989

Y1 - 1989

N2 - The oxidation of Cu(I) with H2O2 in seawater and in NaCl solutions has been measured as a function of pH (6 to 9), temperature (5 to 45°C), ionic strength (0.5 to 6 m) and composition. The seawater rate constants, K (M-1 s-1), for the oxidation d[Cu(I)]/dt = -k[Cu(I)][H2O2] have been fitted to the equation log k = 11.55 - 2250/T - 3.71I 1 2 + 2.06I with a σ = 0.04. The energy of activation was 43.1 ± 1.0 kJ mol-1. At a constant ionic strength (I = 1, 3, and 6 m) in NaCl-NaClO4 mixtures, the Cl- dependence has been attributed to the oxidation of various forms of Cu(I) in the solution. At a fixed Cl- concentration, the addition of Mg2+ causes the rate to decrease, and the addition of HCO- 3 causes the rate to increase. The increase due to HCO- 3 may be due to the formation of CuHCO0 3 which has a faster rate of oxidation than CuCl0. The decrease caused by Mg2+ may be due to the slow exchange of MgEDTA or MgCO3 with Cu2+, which may cause the overall oxidation rates of Cu(I) to be slower due to back reactions of Cu(II) with H2O2. Empirical equations for the rate of oxidation of Cu(I) with H2O2 in natural waters are given. The H2O2 results are compared with the kinetics of Cu(I) oxidation with O2 in natural waters. At the levels of O2 (200 μM) and H2O2 (0.1 μM) in surface sea waters, the oxygen oxidation is 130 times faster than peroxide oxidation. In rainwaters, however, the concentration of hydrogen peroxide (100 μM) is great enough so that H2O2 is the dominant oxidant for Cu(I).

AB - The oxidation of Cu(I) with H2O2 in seawater and in NaCl solutions has been measured as a function of pH (6 to 9), temperature (5 to 45°C), ionic strength (0.5 to 6 m) and composition. The seawater rate constants, K (M-1 s-1), for the oxidation d[Cu(I)]/dt = -k[Cu(I)][H2O2] have been fitted to the equation log k = 11.55 - 2250/T - 3.71I 1 2 + 2.06I with a σ = 0.04. The energy of activation was 43.1 ± 1.0 kJ mol-1. At a constant ionic strength (I = 1, 3, and 6 m) in NaCl-NaClO4 mixtures, the Cl- dependence has been attributed to the oxidation of various forms of Cu(I) in the solution. At a fixed Cl- concentration, the addition of Mg2+ causes the rate to decrease, and the addition of HCO- 3 causes the rate to increase. The increase due to HCO- 3 may be due to the formation of CuHCO0 3 which has a faster rate of oxidation than CuCl0. The decrease caused by Mg2+ may be due to the slow exchange of MgEDTA or MgCO3 with Cu2+, which may cause the overall oxidation rates of Cu(I) to be slower due to back reactions of Cu(II) with H2O2. Empirical equations for the rate of oxidation of Cu(I) with H2O2 in natural waters are given. The H2O2 results are compared with the kinetics of Cu(I) oxidation with O2 in natural waters. At the levels of O2 (200 μM) and H2O2 (0.1 μM) in surface sea waters, the oxygen oxidation is 130 times faster than peroxide oxidation. In rainwaters, however, the concentration of hydrogen peroxide (100 μM) is great enough so that H2O2 is the dominant oxidant for Cu(I).

UR - http://www.scopus.com/inward/record.url?scp=0024884566&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024884566&partnerID=8YFLogxK

U2 - 10.1016/0016-7037(89)90349-9

DO - 10.1016/0016-7037(89)90349-9

M3 - Article

VL - 53

SP - 2269

EP - 2276

JO - Geochmica et Cosmochimica Acta

JF - Geochmica et Cosmochimica Acta

SN - 0016-7037

IS - 9

ER -