Flexural capacity of RC beams externally bonded with SRP and SRG

E. Wobbe, P. Silva, B. L. Barton, L. R. Dharani, V. Birman, Antonio Nanni, T. Alkhrdaji, J. Thomas, G. Tunis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations


The use of externally bonded Steel-Reinforced Polymer (SRP) and Steel Reinforced Grout (SRG) composites is a promising new technology for increasing the flexural and shear capacities of reinforced concrete (RC) members. The reinforcement system in these composites is a sheet made up of unidirectional cords consisting of tightly wound ultra high strength steel wires. The reinforcement can be molded into resin systems (SRP) or cementitious grout (SRG). This paper reports on a study aimed at investigating the flexural strength improvement and performance of RC beams with externally bonded SRP and SRG. Three specimens were tested under four-point bending with variables considered including the number of reinforcement plies and types of bonding agents. Based on this study, it was concluded that this new technology has potential for the repair and strengthening of concrete structures. Test results indicate that up to 100% increase in the flexural capacity can be achieved using these strengthening systems.

Original languageEnglish
Title of host publicationInternational SAMPE Technical Conference
Number of pages8
StatePublished - Sep 29 2004
Externally publishedYes
EventSAMPE 2004 - Long Beach, CA, United States
Duration: May 16 2004May 20 2004


OtherSAMPE 2004
Country/TerritoryUnited States
CityLong Beach, CA


  • Steel reinforced grout
  • Steel reinforced polymer
  • Strengthening

ASJC Scopus subject areas

  • Building and Construction
  • Chemical Engineering(all)
  • Polymers and Plastics
  • Chemical Engineering (miscellaneous)


Dive into the research topics of 'Flexural capacity of RC beams externally bonded with SRP and SRG'. Together they form a unique fingerprint.

Cite this